研究成果

論文リスト-2023年-

Zhu J., Briffod F., Shiraiwa T., Enoki M., Emura S.
Kink band formation mechanism in α/β Ti-9Cr two-phase alloy
Journal of Alloys and Compounds.939(2023)168736

Zhang S., Wu M., Rong J., Zhang X., Han W., Zhao T., Chen X., Naito K., Yu X., Zhang Q.
Synthesis and Characterization of Pyrimidine-Based Novel Phthalonitrile Resins with Excellent Processing Performance and High Glass Transition Temperature
ChemistrySelect.8[13](2023)e202204876

Yuasa M., Sato R., Hoshino T., Ando D., Todaka Y., Miyamoto H., Somekawa H.
Microstructure Evolution and Local Hardness of Mg-Y-Zn Alloys Processed by ECAE
Materials Transactions.64[4](2023)730-734

Yoshinaka F., Sawaguchi T., Takamori S., Emura S., Inoue Y.
Two-fold improvement of low cycle fatigue resistance of steel by bidirectional transformation-induced plasticity
International Journal of Fatigue.171(2023)107581

Yoshinaka F., Nakamura T., Oguma H., Fujimura N., Takeuchi A., Uesugi M., Uesugi K.
Characterization of internal fatigue crack initiation in Ti-6Al-4V alloy via synchrotron radiation X-ray computed tomography
Fatigue and Fracture of Engineering Materials and Structures.(2023)

Yokokawa T., Osada T., Tabata C., Kohata T., Takata Y., Yuyama M., Kawagishi K.
Effect of Solution Heat Treatment on Dendritic Segregation and Creep Strength of Ni–Base Single Crystal Superalloy TMS–238 [Ni 基単結晶超合金 TMS–238 のデンドライト偏析とクリープ強度におよぼす溶体化熱処理の影響]
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals.87[10](2023)288-297

Yen S.-Y., Murakami H., Lin S.-K.
Low-density CoAlTi-B2 strengthened Al-Co-Cr-Mo-Ti bcc refractory high-entropy superalloy designed with the assistance of high-throughput CALPHAD method
Journal of Alloys and Compounds.952(2023)170027

Yamaguchi N., Osada T., Kuo Y.-L., Nanko M.
Influence of cutting damage on the bending strength of Ti2AlC MAX phase machinable ceramics
Journal of the Ceramic Society of Japan.131[4](2023)62-71

Yamagishi K., Takeuchi Y., Ogawa Y., Ando D., Sutou Y.
B2 Ordering and Its Effect on Room Temperature Superelasticity in Mg–Sc Alloy
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.54[7](2023)2841-2848

Yamagishi K., Onyam K., Ogawa Y., Ando D., Sutou Y.
Abnormal grain growth through cyclic heat treatment in a Mg–Sc alloy
Journal of Alloys and Compounds.938(2023)168415

Yamagishi K., Ogawa Y., Ando D., Sutou Y.
Development of Mg-Based Superelastic Alloy Through Aging Heat Treatment
Minerals, Metals and Materials Series.(2023)181-187

Yamagishi K., Ogawa Y., Ando D., Sutou Y.
Adjustable room temperature deformation behavior of Mg–Sc alloy: From superelasticity to slip deformation via TRIP effect
Journal of Alloys and Compounds.931(2023)167507

Yagi Y., Konno R., Hayashi T., Tanaka K., Yamasaki N.Y., Mitsuda K., Sato R., Saito M., Homma T., Nishida Y., Mori S., Iyomoto N., Hara T.
Performance of TES X-Ray Microcalorimeters Designed for 14.4-keV Solar Axion Search
Journal of Low Temperature Physics.211[45418](2023)255-264

Xue G., Nakamura T., Fujimura N., Takahashi K., Oguma H., Takeuchi A., Uesugi M., Uesugi K.
Full-life growth behavior of a naturally initiated internal fatigue crack in beta titanium alloy via in situ synchrotron radiation multiscale tomography
International Journal of Fatigue.170(2023)107571

Wu Z., Nagira T., Ushioda K., Miyamoto G., Fujii H.
Microstructures and Tensile Properties of Friction Stir Welded 0.2%C-2%Si-Cr Steels
ISIJ International.63[6](2023)1084-1095

Wu L., Osada T., Yokokawa T., Chang Y., Kawagishi K.
The temperature dependence of strengthening mechanisms in Ni-based superalloys: A newly re-defined cuboidal model and its implications for strength design
Journal of Alloys and Compounds.931(2023)167508

Wu C.-Y., Lei C.-M., Wu R.T., Wang S.-H., Shih J.-S., Chang H.-Y.
Crystallization and activator reduction simultaneously for calcium sulfide nanophosphors and evaluation of red-light compensation - Environmental reliability
Optical Materials.146(2023)114533

Wang Y., Tomota Y., Ohmura T., Gong W., Harjo S.
Evolution of austenite lattice parameter during isothermal transformation in a 0.4 C low alloyed steel
Materialia.27(2023)101685

Wang Q., Ma N., Huang W., Shi J., Luo X.-T., Tomitaka S., Morooka S., Watanabe M.
Key role of temperature on delamination in solid-state additive manufacturing via supersonic impact
Materials Research Letters.11[9](2023)742-748

Wang Q., Ma N., Chen J., Tomitaka S., Watanabe M.
Microstructure characteristics of warm spray additively manufactured Inconel 718 superalloys and correlation with mechanical performance
Materials Letters.341(2023)134230

Wakeda M., Saida J.
Temperature-dependent effect of cooling rate on the melt-quenching process of metallic glasses
Computational Materials Science.218(2023)111930

Wakeda M., Ohmura T.
Atomistic evaluation of the dislocation transmission across tilt and twist low-angle grain boundaries in body-centered cubic iron
Computational Materials Science.228(2023)112335

Wada K., Shibata C., Yamabe J.
Synergistic Effect of Hydrogen and Sulfur on Ductility Loss in Pure Nickel Accompanied by Hydrogen-Induced Intergranular Fracture [水素助長粒界破壊を伴う純ニッケルの延性低下における水素と硫黄の相乗的役割]
Zairyo/Journal of the Society of Materials Science, Japan.72[6](2023)453-459

Venkataramanan N.S., Suvitha A., Sahara R., Kawazoe Y.
Unveiling the gemcitabine drug complexation with cucurbit[n]urils (n = 6–8): a computational analysis
Structural Chemistry.34[5](2023)1869-1882

Usukawa R., Katsui H., Shimoda K., Kondo S., Hotta M.
Microstructure and integrity of multilayer ceramic coating with alumina top coat on silicon carbide by laser chemical vapor deposition
Ceramics International.49[7](2023)10946-10952

Ueji R., Nagata K., Somekawa H., Demura M.
Application of a sparse mixed regression method to design the optimal composition and heat treatment conditions for transformation-induced plasticity steel with high strength and large elongation
Scripta Materialia.222(2023)115028

Tsuchiyama T., Tsugumi K., Ma T., Masumura T., Ono Y.
Nitrogen-Enhanced Temperature Dependence of Grain Refinement Strengthening in Austenitic Stainless Steel
Steel Research International.94[10](2023)2200428

Tsuchida N., Ueji R., Gong W., Kawasaki T., Harjo S.
Stress partitioning between bcc and cementite phases discussed from phase stress and dislocation density in martensite steels
Scripta Materialia.222(2023)115002

Trang L.T., Le H.V., Hiromoto S., Minho O., Kobayashi E., Nguyen N.V., Cao N.Q.
In vitro cellular biocompatibility and in vivo degradation behavior of calcium phosphate-coated ZK60 magnesium alloy
Biomedical Materials (Bristol).18[3](2023)35003

Tobata Y., Naito K., Tanks J.
Direct measurement and verification of cohesive zone model parameters for basalt/PP rods using the transverse tensile test and virtual double cantilever beam test
Polymer Composites.44[2](2023)954-962

Teramoto T., Kitasumi K., Shimohara R., Ito Y., Shimizu R., Tanaka K., Ueji R.
Formation condition and effect on the early stages of plastic deformation of chemical short-range order in Cr-Co-Ni medium-entropy alloy
Journal of Alloys and Compounds.941(2023)169016

Tanks J., Tamura K., Naito K., Nge T.T., Yamada T.
Glycol lignin/MAH-g-PP blends and composites with exceptional mechanical properties for automotive applications
Composites Science and Technology.238(2023)110030

Tanks J., Naito K., Tamura K.
Rigid epoxy networks with very high intrinsic fracture toughness using a piperazine-based in-situ polymerization strategy
Materials Letters.335(2023)133821

Tanks J., Hiroi T., Tamura K., Naito K.
Tethering Organic Disulfides to Layered Silicates: A Versatile Strategy for Photo-Controllable Dynamic Chemistry and Functionalization
Bulletin of the Chemical Society of Japan.96[1](2023)65-71

Talara M., Bulgarevich D.S., Kobayashi K., Kitahara H., Furuya T., Escano M.C., Watanabe M., Tani M.
Impact of Antenna Metal's Thicknesses and Structures on Terahertz (THz) Wave Generation Performance of Spintronic Emitters
International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz.(2023)

Tabata C., Kawagishi K., Yokokawa T., Uzuhashi J., Ohkubo T., Harada H., Suzuki S.
Effect of Ca Addition on the Oxidation Resistance of Ni–Al Alloy
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.54[5](2023)1937-1945

Suzuki I., Abe T., Sepehri-Amin H., Hono K., Takahashi Y.K.
Microstructure evolution in FePt-Cr2O3 granular thin films
Journal of Magnetism and Magnetic Materials.579(2023)170874

Suvitha A., Venkataramanan N.S., Sahara R.
The structure, stability, thermochemistry, and bonding in SO3-(H2O)n (n = 1–7) clusters: a computational analysis
Structural Chemistry.34[1](2023)225-237

Somekawa H., Naito K.
Grain boundary plasticity at intermediate temperatures in fine-grained Mg-Mn ternary alloys
Journal of Alloys and Compounds.942(2023)169012

Somekawa H., Motohashi N., Kuroda S., Mandai T.
Mechanical and functional properties of ultra-thin Mg foils
Materials Science and Engineering: A.872(2023)144934

Shimoda K., Kakisawa H.
Novel production route for SiC/SiC ceramic-matrix composites using sandwich prepreg sheets
Journal of the European Ceramic Society.43[3](2023)805-813

Shimoda K., Hinoki T.
Effect of BN nanoparticle content in SiC matrix on microstructure and mechanical properties of SiC/SiC composites
International Journal of Applied Ceramic Technology.20[4](2023)2466-2477

Shibata A., Miyamoto G., Morito S., Nakamura A., Moronaga T., Kitano H., Gutierrez-Urrutia I., Hara T., Tsuzaki K.
Substructure and crystallography of lath martensite in as-quenched interstitial-free steel and low-carbon steel
Acta Materialia.246(2023)118675

Sciazko A., Komatsu Y., Nakamura A., Ouyang Z., Hara T., Shikazono N.
3D microstructures of solid oxide fuel cell Ni-YSZ anodes with carbon deposition
Chemical Engineering Journal.460(2023)141680

Sawaguchi T., Tomota Y., Yoshinaka F., Harjo S.
Evidence supporting reversible martensitic transformation under cyclic loading on Fe–Mn–Si–Al alloys using in situ neutron diffraction
Acta Materialia.242(2023)118494

Qiu H., Ueji R., Inoue T.
Yield-Point Phenomenon and Plastic Bands in Ferrite–Pearlite Steels
Materials.16[1](2023)195

Qiu H., Inoue T.
Evolution of Poisson’s Ratio in the Tension Process of Low-Carbon Hot-Rolled Steel with Discontinuous Yielding
Metals.13[3](2023)562

Pomes S., Adachi N., Wakeda M., Ohmura T.
Probing pre-serration deformation in Zr-based bulk metallic glass via nanoindentation testing
Scripta Materialia.237(2023)115713

Paul V., Ameyama K., Ota-Kawabata M., Ohmura T.
Evaluation of Deformation and Fracture Behavior in 304L Austenitic Steel Harmonic Structures through Nanoindentation
Steel Research International.94[2](2023)2200354

Osada T., Koyama T., Bulgarevich D.S., Minamoto S., Osawa M., Watanabe M., Kawagishi K., Demura M.
Virtual heat treatment for γ-γ′ two-phase Ni-Al alloy on the materials Integration system, MInt
Materials and Design.226(2023)111631

Okuma G., Osada T., Minagawa H., Arai Y., Inoue R., Kakisawa H., Shimoda K., Takeuchi A., Uesugi M., Tanaka S., Wakai F.
Heterogeneities and defects in powder compacts and sintered alumina bodies visualized by using the synchrotron X-ray CT
Journal of the European Ceramic Society.43[2](2023)486-492

Okuma G., Endo M., Minagawa H., Inoue R., Kakisawa H., Kohata T., Osada T., Yamamoto T., Azuma M., Takeuchi A., Uesugi M., Guillon O., Wakai F.
3D Visualization of Morphological Evolution of Large Defects during Spark Plasma Sintering of Alumina Granules
Advanced Engineering Materials.25[18](2023)2201534

Okada K., Shibata A., Sasaki T., Matsumiya H., Hono K., Tsuji N.
Improvement of resistance against hydrogen embrittlement by controlling carbon segregation at prior austenite grain boundary in 3Mn-0.2C martensitic steels
Scripta Materialia.224(2023)115043

Ohtani T., Ishii Y., Tabuchi M., Hongo H., Sawada K.
Creep-induced nonlinear acoustic characterizations and microstructural change in an austenitic stainless steel
Materials Characterization.197(2023)112657

Ohno K., Kuwahara R., Sahara R., Pham T.N., Bhattacharyya S., Kawazoe Y., Fujisaki K.
Microstructures in Iron-rich FeSi Alloys by First-principles Phase Field and Special Quasirandom Structure Methods
ISIJ International.63[3](2023)553-558

Ohmura T., Wakeda M.
Nano Mechanical Characterization and Physical Modeling of Plastic Deformation Chapter 1: Dislocation–Grain Boundary Interaction as a Strengthening Factor [微小領域の力学挙動解析と塑性現象のモデリング― 第 1 報 転位―粒界相互作用の考察 ―]
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals.87[2](2023)31-44

Ogawa Y., Naito K., Harada K., Oguma H.
Proposal of Evaluation Method for Crack Propagation Behaviors of Second-Generation Acrylic Adhesives under Mode I Static Loading
Polymers.15[8](2023)1878

Nishikawa H., Habib K., Furuya Y., Hara T., Osada T., Kawagishi K.
Short fatigue crack growth mechanism in Ni-Co based superalloy at elevated temperatures and in oxidative atmospheres
Materials Science and Engineering: A.885(2023)145655

Nishikawa H., Furuya Y., Osada T., Kawagishi K., Hara T.
Three-dimensional high-resolution crystallographic observation of the entire volume of microstructurally small fatigue cracks in Ni-Co based superalloy
Scripta Materialia.222(2023)115026

Nakamura Y., Hibi Y., Naito K., Yamamoto N., Hanamura M.
Chemical Structure Evaluations of Amine Hardeners to Ensure and Predict the Performance of Wet Adhesion of Epoxies
Bulletin of the Chemical Society of Japan.96[12](2023)1339-1345

Naito K., Nakamura M., Matsuoka T.
Friction and wear properties of polyacrylonitrile- and pitch-based carbon fiber-reinforced polymer matrix composites containing silicon carbide nanoparticles
Polymer Composites.44[4](2023)2405-2416

Naidu Palleda T., Banoth S., Tanaka M., Murakami H., Kakehi K.
The role of yttrium micro-alloying on microstructure evolution and high-temperature mechanical properties of additively manufactured Inconel 718
Materials and Design.225(2023)111567

Nagira T., Nakamura T., Kimura T., Yoshinaka F., Sawaguchi T., Yamashita T., Aoki Y., Fujii H.
Elucidation of solidification mode of Fe-Mn-Si alloy during TIG spot welding using synchrotron X-ray
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society.41[2](2023)1S-5S

Nagira T.
Recent Trend of FSW/FSP [FSW/FSP 研究の現状]
Yosetsu Gakkai Shi/Journal of the Japan Welding Society.92[5](2023)330-331

Nagashima N., Yoshinaka F., Sawaguchi T.
Study on Extremely-Low-Cycle Fatigue of Fe15Mn10Cr8Ni4Si Alloy
Materials Transactions.64[2](2023)548-554

Morishita M., Abe T., Yamamoto H., Nozaki A., Kimura S.
Thermodynamic and magnetic properties for Dy2Fe14B determined by heat capacity measurement from very low to high temperatures and solution calorimetry
Thermochimica Acta.721(2023)179410

Mori Y., Kawano Y., Kobayashi J., Kuramoto S., Emura S., Sawaguchi T.
Effect of Stability of γ phase on Lüders-like Deformation Behavior of Cold-rolled Fe-Ni-Al-C Alloys [Fe-Ni-Al-C 系合金冷間圧延材のリューダース型変形挙動に及ぼすγ相安定性の影響]
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan.109[8](2023)695-703

Meng L., Kitashima T., Zhao Z., Wei Q., Lin P.
Effect of parent β-texture on α-texture evolution during dynamic precipitation in a continuous forging process of Ti-6Al-4V alloy
Journal of Alloys and Compounds.947(2023)169425

Masato W.
Atomistic Study on Microstructure Control and Deformation Behaviors of Metallic Glasses [金属ガラスにおける構造制御と変形挙動の原子論的研究]
Zairyo/Journal of the Society of Materials Science, Japan.72[3](2023)214-215

Mao W., Gao S., Gong W., Bai Y., Harjo S., Park M.-H., Shibata A., Tsuji N.
Quantitatively evaluating respective contribution of austenite and deformation-induced martensite to flow stress, plastic strain, and strain hardening rate in tensile deformed TRIP steel
Acta Materialia.256(2023)119139

Manaka T., Tsutsumi Y., Takada Y., Chen P., Ashida M., Doi K., Katayama H., Hanawa T.
Galvanic Corrosion among Ti6Al4V ELI Alloy, CoCrMo Alloy, 316L-Type Stainless Steel, and Zr1Mo Alloy for Orthopedic Implants
Materials Transactions.64[1](2023)131-137

Maeda K., Okuma G., Yoshida S., Wakai F., Takeuchi A., Uesugi M., Yanagioka S., Matsunuma S., Machida S., Yasumori A.
Indentation-induced ductile behavior of glass–ceramics involving layered aluminosilicates
Journal of the American Ceramic Society.106[12](2023)7440-7448

Machida S., Okuma G., Arai Y., Takeuchi A., Uesugi M., Katsumata K.-I., Yasumori A.
A three-dimensional image reflecting the dispersion state of ceramic platelets in solvent: Observation of montmorillonite dispersed in silica gel by synchrotron X-ray multiscale tomography
Applied Clay Science.242(2023)107025

Louis Etienne M., Stéphane G., Guillaume L., Hideyuki M.
Microstructure and oxidation behavior of Co–Cr–Ta ternary alloys
Journal of Alloys and Compounds.936(2023)167968

Li X., Jin L., Mao H., Murakami H., Guo S.
Solid solution softening or hardening induced by minor substitutional additions in a Hf20Nb31Ta31Ti18 refractory high entropy alloy
AIP Advances.13[8](2023)85033

Lee J.-L., Wang P.-T., Lo K.-C., Shen P.-K., Tsou N.-T., Kakehi K., Murakami H., Tsai C.-W., Gorsse S., Yeh A.-C.
Effect of serrated grain boundary on tensile and creep properties of a precipitation strengthened high entropy alloy
Science and Technology of Advanced Materials.24[1](2023)2158043

Kuroda T., Masuyama H., Toda Y., Matsunaga T., Ito T., Watanabe M., Ozasa R., Ishimoto T., Nakano T., Shimojo M., Yamabe-Mitarai Y.
Microstructure Evolution and High-Temperature Mechanical Properties of Ti6Al4Nb4Zr Fabricated by Selective Laser Melting
Materials Transactions.64[1](2023)95-103

Kuramoto S., Kawano Y., Mori Y., Kobayashi J., Emura S., Sawaguchi T.
Mechanical Properties and Deformation Behavior in Severely Cold-Rolled FeNiAlC Alloys with Lüders Deformation -Overview with Recent Experimental Results-
Materials Transactions.64[7](2023)1410-1418

Kimura H., Nakamura H., Goto T., Uchida W., Uozumi T., Nishizawa D., Shinha K., Sakagami J., Doi K.
Standalone cell culture microfluidic device-based microphysiological system for automated cell observation and application in nephrotoxicity tests
Lab on a Chip.24[3](2023)408-421

Kim S.-H., Osada T., Matsushita Y., Hiroto T., Fisher C.A.J., Jang B.-K.
CMAS corrosion behavior of dual-phase composite Gd2Si2O7/Sc2Si2O7 as a promising EBC material
Journal of the European Ceramic Society.43[14](2023)6440-6448

Katagiri J., Kusano M., Minamoto S., Kitano H., Daimaru K., Tsujii M., Watanabe M.
Melt Pool Shape Evaluation by Single-Track Experiments and Finite-Element Thermal Analysis: Balling and Lack of Fusion Criteria for Generating Process Window of Inconel738LC
Materials.16[4](2023)1729

Kanazawa T., Hayakawa M., Vinas D., Tahara Y., Hata N., Yoshimoto M.
Sustainable technology for remanufacturing of carburized steels by laser hardening
Journal of Materials Research and Technology.24(2023)39-48

Kadowaki M., Katayama H., Yamamoto M.
Galvanic current analysis of AA6016/SM490 couple using experimental and numerical simulation data in various NaCl solutions
Corrosion Science.211(2023)110918

Jodi D.E., Kitashima T., Singh A., Watanabe M.
High-temperature microstructural stability of pure Ni fabricated by laser powder bed fusion using Gaussian and flat-top beam profiles
Materials Characterization.200(2023)112897

Jiang B., Men D., Emura S., Tsuchiya K.
Microstructural response and mechanical properties of α-precipitated Ti–5Al–5Mo–5V–3Cr alloy processed by high-pressure torsion
Journal of Materials Research and Technology.23(2023)564-576

Jiang B., Doi K., Tsuchiya K.
Characterization of microstructures and micromechanical properties of naturally generated rust layer in 60-year old reinforced concrete
Construction and Building Materials.366(2023)130203

Iwamoto S., Kondo S., Katsui H., Shimoda K., Yu H., Ogino Y., Kasada R.
Evaluation of equi-biaxial strength of thin sic coatings using ring-on-ring testing and digital image correlation
International Journal of Applied Ceramic Technology.(2023)

Ishikawa T., Sahara R., Ohno K., Ueda K., Narushima T.
Electronic structure analysis of light-element-doped anatase TiO2">2 using all-electron GW approach
Computational Materials Science.220(2023)112059

Inoue T., Hiroto T., Hara Y., Nakazato K., Oka S.-I.
Tissue structure and mechanical properties of the exoskeleton of the huge claws of the mud crab, Scylla serrata
Journal of Materials Science.58[3](2023)1099-1115

Imai M., Han K., Nishio M., Kato T., Kawada S., Emura S., Abe T., Fujihisa H.
Sr–Si diagram at Si contents of 55–100 at% and crystal structure of SrSi2-x
Journal of Alloys and Compounds.968(2023)172137

Hwang S., Myeong-Heom P., Bai Y., Shibata A., Adachi H., Sato M., Tsuji N.
The Effect of Serration Behavior on Strain Hardening and Deformation in 22Mn-0.6C Steel
International Symposium on New Developments in Advanced High-Strength Sheet Steels, AHSS 2023.(2023)119-124

Huang W., Wang Q., Ma N., Kitano H.
Characteristics of residual stress distribution in wire-arc additive manufactured layers of low transformation temperature material
International Communications in Heat and Mass Transfer.148(2023)107066

Hiromoto S., Fukuzawa K., Doi K., Chiba M., Ohtsu N.
Corrosion Protection Behavior of Aluminate Ion-Loaded Layered Double Hydroxide Coating on AZ31 Magnesium Alloy
Journal of the Electrochemical Society.170[12](2023)121502

Hiromoto S., Doi K.
Effect of polyethylene glycol modification on the corrosion behavior of hydroxyapatite-coated AZ31 Mg alloy under tensile deformation
Corrosion Science.212(2023)110931

Hirai Y., Van Baaren S., Ohmura T., Nakanishi T., Takeda T., Kitagawa Y., Hasegawa Y., Métivier R., Allain C.
Bright LanthanideIII Triboluminescence despite Low Photoluminescence, and Dual Triboluminescence and Mechano-Responsive Photoluminescence
Advanced Optical Materials.11[9](2023)2203139

Hatakeyama T., Sawada K., Suzuki M., Watanabe M.
Microstructure development of modified 9Cr-1Mo steel during laser powder bed fusion and heat treatment
Additive Manufacturing.61(2023)103350

Hashimoto M., Takahashi H., Tabata-Okubo K., Nagaoka N., Tokunaga K., Matsumori H., Ishihara Y., Kaku M., Iimura T., Hara T., Kamioka H.
Bundling of collagen fibrils influences osteocyte network formation during bone modeling
Scientific Reports.13[1](2023)22028

Hara T.
Techniques and Applications of FIB-SEM Serial Sectioning Observation [集束イオンビームを利用した SEM シリアルセクショニングの観察技法と応用]
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering.89[6](2023)440-443

Han W., Wu M., Rong J., Zhang S., Zhang X., Zhao T., Yu X., Naito K., Zhang Q.
Effect of functionalized nanodiamond on properties of polylactic acid eco-friendly composite films
Diamond and Related Materials.133(2023)109717

Hagiwara M., Kitashima T.
High Cycle Fatigue and Very High Cycle Fatigue of Orthorhombic (O + α2)-Type Ti–27.5Nb–13Al Alloy with and without B and Fatigue Striation Analysis in Comparison with (α + β)-Type Titanium Alloys
Materials Transactions.64[1](2023)121-130

Guo W., Niiyama T., Yamada R., Wakeda M., Saida J.
Synthesis and mechanical properties of highly structure-controlled Zr-based metallic glasses by thermal rejuvenation technique
Journal of Physics Condensed Matter.35[15](2023)154004

Guo S., Okuma G., Naito K., Kakisawa H.
Mechanical behaviors of hot-pressed 4TaC–1ZrC ceramics with and without Y2O3 and La2O3 additives
International Journal of Refractory Metals and Hard Materials.117(2023)106389

Guo B., Mao W., Chong Y., Shibata A., Harjo S., Gong W., Chen H., Jonas J.J., Tsuji N.
Unexpected dynamic transformation from α phase to β phase in zirconium alloy revealed by in-situ neutron diffraction during high temperature deformation
Acta Materialia.242(2023)118427

Gong W., Harjo S., Tomota Y., Morooka S., Kawasaki T., Shibata A., Tsuji N.
Lattice parameters of austenite and martensite during transformation for Fe–18Ni alloy investigated through in-situ neutron diffraction
Acta Materialia.250(2023)118860

Gholizadeh R., Yoshida S., Bai Y., Kurokawa S., Shibata A., Tsuji N.
Global understanding of deformation behavior in CoCrFeMnNi high entropy alloy under high-strain torsion deformation at a wide range of elevated temperatures
Acta Materialia.243(2023)118514

Furuya Y., Nishikawa H., Hirukawa H., Nagashima N., Takeuchi E.
Gigacycle Fatigue Properties of Wrought Aluminum Alloys
Materials Performance and Characterization.12[2](2023)

Enomoto S., Kou S., Abe T., Gohda Y.
Subphase exploration for SmFe12-based permanent magnets by Gibbs energies obtained with first-principles cluster-expansion method
Journal of Alloys and Compounds.950(2023)169849

Enoki M., Minamoto S., Ohnuma I., Abe T., Ohtani H.
Current Status and Future Scope of Phase Diagram Studies
ISIJ International.63[3](2023)407-418

Deffrennes G., Terayama K., Abe T., Ogamino E., Tamura R.
A framework to predict binary liquidus by combining machine learning and CALPHAD assessments
Materials and Design.232(2023)112111

Daram P., Hiroto T., Watanabe M.
Microstructure and phase evolution of functionally graded multi-materials of Ni–Ti alloy fabricated by laser powder bed fusion process
Journal of Materials Research and Technology.23(2023)5559-5572

Cui D., Sciazko A., Komatsu Y., Nakamura A., Hara T., Wu S., Xiao R., Shikazono N.
Three dimensional microstructures of carbon deposition on Ni-YSZ anodes under polarization
Journal of Energy Chemistry.87(2023)359-367

Chung T.-F., Lin S.-Q., Li H., Hsiao C.-N., Yang J.-R., Tsao C.-S., Ohmura T.
Microstructure evolution and shearing behaviour of δꞌ/θꞌ/δꞌ precipitates in an aged Al-Cu-Li-Mg aluminium alloy
Journal of Alloys and Compounds.953(2023)170095

Chandiran E., Ogawa Y., Ueji R., Somekawa H.
An inverse Hall-Petch relationship during room-temperature compression of commercially pure magnesium
Journal of Alloys and Compounds.930(2023)167443

Bulgarevich D.S., Nomoto S., Watanabe M., Demura M.
Crystal plasticity simulations with representative volume element of as-build laser powder bed fusion materials
Scientific Reports.13[1](2023)20372

Battulga B., Shiizaki K., Miura Y., Osanai Y., Yamazaki R., Shinohara Y., Kubota Y., Hara T., Kuro-o M., Ohno N.
Correlative light and electron microscopic observation of calcium phosphate particles in a mouse kidney formed under a high-phosphate diet
Scientific Reports.13[1](2023)852

Banoth S., Palleda T.N., Saito T., Murakami H., Kakehi K.
Creep anisotropy reduction and improvement via post-heat treatment in yttrium-added Hastelloy-X fabricated by laser powder bed fusion
International Journal of Advanced Manufacturing Technology.126[45355](2023)1593-1609

Anetai H., Matsushita Y., Ohmura T., Takeuchi M.
Mechanically Flexible Crystals of Benzene Derivatives with Halogen or Methyl Groups
Crystal Growth and Design.23[6](2023)4025-4031

Álvarez G., Harris Z., Wada K., Rodríguez C., Martínez-Pañeda E.
Hydrogen embrittlement susceptibility of additively manufactured 316L stainless steel: Influence of post-processing, printing direction, temperature and pre-straining
Additive Manufacturing.78(2023)103834

Ajito S., Hojo T., Koyama M., Hiromoto S., Akiyama E.
Environment-assisted cracking of AZ31 magnesium alloy in a borate buffer solution containing ammonium thiocyanate under various potentials
Corrosion Science.218(2023)111195

Abe T., Han K., Goto Y., Ohnuma I., Koyama T.
Stabilization of Equiatomic Solutions Due to High-Entropy Effect
Materials Transactions.64[4](2023)877-884

Abe R., Takahashi Y., Watanabe Y., Okuma G., Wakai F.
Coarsening of metal/ceramics bicontinuous structures enhanced by stress-induced instability under cyclic thermal stress
Acta Materialia.244(2023)118526

Yoshinaka F., Nagashima N., Sawaguchi T.
Effect of Strain Rate on the Extremely Low-Cycle Fatigue of Fe-15Mn-10Cr-8Ni-4Si Bidirectional-TRIP Steel [Fe-15Mn-10Cr-8Ni-4Si bidirectional-TRIP 鋼の極低サイクル疲労に及ぼすひずみ速度の影響]
Zairyo/Journal of the Society of Materials Science, Japan.72[12](2023)858-865

Nagira T., Nakamura T., Sawaguchi T., Mori M., Morisada Y., Fujii H.
Friction Stir Welding of Fe-15Mn-10Cr-8Ni-4Si Seismic Damping Alloy
ISIJ International.63[12](2023)2056-2065

Inoue T., Hara Y., Nakazato K.
Mechanical Resistance of the Largest Denticle on the Movable Claw of the Mud Crab
Biomimetics.8[8](2023)602

Zhu J., Briffod F., Shiraiwa T., Enoki M., Emura S.
High-Resolution Digital Image Correlation Analysis of Layered α/β Two-Phase Ti–12Mo Alloy under Compressive Condition
Materials Transactions.64[12](2023)2677-2686

Kitahara H., Ishii K., Talara M., Furuya T., Escano M.C., Tani M., Bulgarevich D.S., He D., Watanabe M.
Improvement in the Detection Efficiency of Terahertz (THz) Time-domain Spectroscopy (TDS) by applying an Alternating Magnetic Field Bias in Spintronic Emitter
International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz.(2023)

Katsui H., Shimoda K., Hotta M.
Preparation of silicon carbide and tantalum carbonitride composite with high hardness and moderate elastic modulus by laser chemical vapor deposition for anti-erosion protective coatings
Ceramics International.49[23](2023)38813-38823

Okuma G.
3D microstructural evolution in sintering observed by X-ray microtomography
Journal of the Ceramic Society of Japan.131[9](2023)522-532

Singh D., Tasaki W., Yoshinaka F., Takamori S., Emura S., Tsuchiya K., Sawaguchi T.
Unveiling the transformation pathways of hierarchical γ90 – εtwin – α’ triple phase structure formation at ε-ε martensite intersection
Materials Characterization.205(2023)113358

Tabata C., Osada T., Yokokawa T., Ikeda A., Kawagishi K., Suzuki S.
Effect of Solution Heat-Treatment on the Oxidation Resistance of Ni-Base Single-Crystal Superalloy
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.54[12](2023)4825-4833

Wakeda M., Ichitsubo T.
Atomistic study of liquid fragility and spatial heterogeneity of glassy solids in model binary alloys
NPG Asia Materials.15[1](2023)46

Guo, S., Okuma, G., Naito, K., Kakisawa, H.
Mechanical properties of hot-pressed VB2–SiC composites with and without WC
Ceramics International.49[22](2023)35368-35376

Katagiri, J., Kusano, M., Nomoto, S., Watanabe, M.
Influence of recoil pressure, mushy zone flow resistance and reflectivity on melt pool shape in laser powder bed fusion simulation
Case Studies in Thermal Engineering.50(2023)103477

Ogino, Y., Nomura, K., Komen, H., Kitano, H., Tanaka, M.
Recent Progresses and Future Prospects of Science and Technology in Welding Process [溶接法研究委員会 -新溶接アーク現象のその先へ-]
Yosetsu Gakkai Shi/Journal of the Japan Welding Society.92[5](2023)309-319

Ozeki, G., Yokobori, T.A., Jr., Tabuchi, M., Hayakawa, M., Nikbin, K.
Testing and Estimation Methods of Crack Growth Life for Alloy 617 under Strain-Controlled Creep-Fatigue Conditions Using Circular Sharp Notched Round Bar Specimen
ASTM Special Technical Publication.STP 1643(2023)42-62

Tozman P., Sepehri-Amin H., Abe T., Hono K., Takahashi Y.K.
Exploring secondary phases in the Sm–Fe–V system beneficial for coercivity.
Acta Materialia.258(2023)119197

Tsuchiya, H., Yamada, N., Miyabe, S., Doi, K., Fujimoto, S.
Improved corrosion fatigue performance of 316L stainless steel by surface porosification
Materials Letters.353(2023)135265

Wakeda, M., Osada, T., Ohmura, T.
Atomistic analysis of temperature-dependent dislocation dynamics in Ni3Al-based intermetallic alloys
Materials Today Communications.37(2023)106987

Han,K.,Sahara,R.,Abe,T.,Oikawa,K.,Ueshima,N.,Ohnuma,I.
Phase equilibria of the Co-Cr-Mn ternary system at 700℃
Journal of Alloys and Compounds.965(2023)171315

Hatakeyama,T.,Sawada,K.,Sekido,K.,Kimura,K.
Beneficial role of the grain boundary precipitates for intergranular creep fracture of 25Cr–20Ni–Nb–N steel
Materials Science and Engineering: A.882(2023)145487

Morishita,M.,Abe,T.,Ohkubo,T.,Tadano,T.,Yamamoto,H.,Nozaki,A.,Miyazaki,H.
Magnetic characterization of Sm(Fe1-x, Cox)11Ti (x = 0, 0.1) determined by heat-capacity measurement from very low to high temperatures
Thermochimica Acta.727(2023)179573

Naito,K.
Effect of the number of filaments on the tensile properties of polyacrylonitrile- and pitch-based carbon fiber epoxy-impregnated bundle composites
Results in Materials.19(2023)100424

Nandal,V.,Dieb,S.,Bulgarevich,D.S.,Osada,T.,Koyama,T.,Minamoto,S.,Demura,M.
Artificial intelligence inspired design of non-isothermal aging for γ–γ′ two-phase, Ni–Al alloys
Scientific Reports.13[1](2023)12660

Ogawa,Y.,Iwata,K.
Fatigue Crack Propagation in Pearlitic Steel under Pressurized Gaseous Hydrogen: Influences of Microstructure Size and Strength Level
ISIJ International.63[7](2023)1251-1262

Ueji,R.,Gong,W.,Harjo,S.,Kawasaki,T.,Shibata,A.,Kimura,Y.,Inoue,T.,Tsuchida,N.
Deformation-Induced Martensitic Transformation at Tensile and Compressive Deformations of High-Carbon Bainitic Steel
International Symposium on New Developments in Advanced High-Strength Sheet Steels, AHSS 2023.(2023)288-297

Wakai,F.,Okuma,G.,Mücke,R.,Guillon,O.
Corrigendum to “Modelling of elimination of strength-limiting defects by pressure-assisted sintering at low stress levels” [J. Eur. Ceram. Soc. 41 (2021) 202–210, (S095522192100683X), (10.1016/j.jeurceramsoc.2021.09.040)]
Journal of the European Ceramic Society.43[16](2023)7721

Chandiran, E., Ogawa, Y., Ueji, R., Singh, A., Somekawa, H.
Enhancement of damping capacity by deformation-induced martensitic transformation in Mg–Sc alloy
Materials Science and Engineering: A.880(2023)145198

Gutierrez-Urrutia, I., Shibata, A.
Influence of microscope settings on dislocation imaging in transmission forescattered electron imaging (t-FSEI)
Materials Characterization.203(2023)113147

Jiang, B., Doi, K., Tsuchiya, K.
The Constituent Phases and Micromechanical Properties of Steel Corrosion Layers Generated by Hyperbaric-Oxygen Accelerated Corrosion Test
Materials.16[13](2023)4521

Kadowaki, M., Katayama, H.
Corrosion behavior of pure Al under Fe rust deposition: Decrease in the corrosion resistance of Al caused by γ-FeOOH
Corrosion Science.222(2023)111379

Morishita, K., Yamaguchi, T., Wada, K., Yamabe, J.
Technique for Introducing Internal Defects with Arbitrary Sizes and Locations in Metals via Additive Manufacturing and Evaluation of Fatigue Properties
International Journal of Automation Technology.17[4](2023)378-387

Nishimura, N., Masaki, K., Tan, W., Iimura, R., Kobayashi, H., Nishikawa, K., Mandai, T., Somekawa, H., Tominaga, Y.
Spray-Dried MgMn2O4 Spinel Oxide Cathode with Single Mg Ion-Conductive Polymers for Rechargeable Mg Metal Battery
Journal of Physical Chemistry C.127[25](2023)11829-11835

Ohmura, T., Wakeda, M.
Nano Mechanical Characterization and Physical Modeling of Plastic Deformation Chapter 2: Strengthening Mechanisms by Various Lattice Defects [微小領域の力学挙動解析と塑性現象のモデリング― 第2報 多様な格子欠陥による強化機構の考察 ―]
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals.87[2](2023)45-55

Doi, K., Hiromoto, S.
Rapid Formation of Calcium Hydroxy Zincate on Zinc by Hyperbaric-Oxygen
Materials Transactions.64[6](2023)1232-1240

Hatakeyama, T., Sekido, K., Sawada, K.
Prediction of Graphitization Behavior during Long-Term Creep in Carbon Steels
ISIJ International.63[5](2023)910-918

Inoue, T., Hara, Y., Nakazato, K.
Mechanical Resistance and Tissue Structure of Claw Denticles of Various Sizes in the Mud Crab, Scylla serrata
Materials.16[11](2023)4114

Ogawa, Y., Takakuwa, O., Tsuzaki, K.
Solid-solution hardening by hydrogen in Fe–Cr–Ni-based austenitic steel: Temperature and strain rate effects
Materials Science and Engineering: A.879(2023)145281

Okada, K., Shibata, A., Tsuji, N.
Characteristics and formation mechanism of serrated markings on the hydrogen-related quasi-cleavage fracture in as quenched low-carbon martensitic steel
Scripta Materialia.234(2023)115568

Rahman, M., Maeda, T., Osada, T., Ozaki, S.
Method of Determining Kinetic Parameters of Strength Recovery in Self-Healing Ceramic Composites
Materials.16[11](2023)4079

Shibata, A., Gutierrez-Urrutia, I., Nakamura, A., Okada, K., Miyamoto, G., Madi, Y., Besson, J., Hara, T., Tsuzaki, K.
Three-dimensional propagation behavior of hydrogen-related intergranular cracks in high-strength martensitic steel
International Journal of Hydrogen Energy.48[88](2023)34565-34574

Chen, T., Koyama, M., Ogawa, Y., Matsunaga, H., Akiyama, E.
Martensite Boundary Characteristics on Cycle- and Time-Dependent Fatigue Crack Growth Paths of Tempered Lath Martensitic Steels in a 90 MPa Gaseous Hydrogen Atmosphere
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.54[7](2023)2512-2518

Hiromoto, S., Doi, K.
Formation of Composite Coatings of Layered Double Hydroxide Particles and Hydroxide Gel by Electrophoretic Deposition on Mg Alloy and Corrosion Resistance
Materials Transactions.64[5](2023)1011-1019

Jodi, D.E., Kitashima, T., Watanabe, M.
Effect of scan strategy on the formation of a pure nickel single-crystal structure using a flat-top laser beam via laser powder bed fusion
Science and Technology of Advanced Materials.24[1](2023)2201380

Kadowaki, M., Katayama, H., Yamamoto, M.
Corrosion behavior of AA6016/SM490 galvanic couple in NaCl-containing droplets: Effect of Fe species on galvanic corrosion acceleration
Corrosion Science.218(2023)111190

Naito, K., Seki, Y., Inoue, R.
Static and Fatigue Tensile Properties of Cross-Ply Carbon-Fiber-Reinforced Epoxy-Matrix-Composite Laminates with Thin Plies
Journal of Composites Science.7[4](2023)146

Somekawa, H., Yuasa, M.
Induced kink boundary in Mg-Y-Zn alloy by tube-shape forming
Materials Letters.345(2023)134484

Somekawa, H., Nishikawa, K., Moronaga, T., Ohmura, T.
Fabrication of Li anode metal via bulk mechanical property analysis
Journal of Power Sources.569(2023)233019

Takakuwa, O., Ogawa, Y., Miyata, R.
Antagonistic fatigue crack acceleration/deceleration phenomena in Ni-based superalloy 718 under hydrogen-supply
Scientific Reports.13[1](2023)6804

Takata, Y., Sugiyama, T., Yuyama, M., Uzuhashi, J., Ohkubo, T., Harada, H., Suzuki, S., Kawagishi, K.
Influence of the Impurity Element Sb on Oxidation Resistance and Creep Strength of the Ni–Base Single Crystal Superalloy TMS–238 [Ni 基単結晶超合金 TMS–238 の耐酸化性とクリープ強度に及ぼす不純物元素 Sbの影響]
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals.87[3](2023)88-94

Tsutsumi, Y., Tsutsumi, H., Manaka, T., Chen, P., Ashida, M., Katayama, H., Hanawa, T.
Development of a Surface Treatment to Achieve Long-Lasting Antimicrobial Properties and Non-Cytotoxicity through Simultaneous Incorporation of Ag and Zn via Two-Step Micro-Arc Oxidation
Coatings.13[3](2023)627

Wada, K., Shibata, C., Enoki, H., Iijima, T., Yamabe, J.
Hydrogen-induced intergranular cracking of pure nickel under various strain rates and temperatures in gaseous hydrogen environment
Materials Science and Engineering: A.873(2023)145040

 

スマートフォン用ページで見る