Bainsla L., Sakuraba Y., Kumar A., Chaurasiya A.K., Masuda K., Suwannaharn N., Awad A.A., Behera N., Khymyn R., Sasaki T., Dash S.P., Åkerman J.
Energy-Efficient Single Layer Spin Hall Nano-Oscillators Driven by Berry Curvature
ACS Nano.19[19](2025)18534-18544
Vidilli A.L., Gomes L.F., Oliveira A.P., Saha M., Sasaki T., Otani L.B., Okulov I., Bolfarini C.
Segregation-induced microstructural refinement in a FeMnAlC-TiB metal matrix composite by laser powder bed fusion
Progress in Additive Manufacturing.(2025)101033
Saito T., Harada H., Osawa M., Yokokawa T., Kawagishi K., Suzuki S.
Elastic moduli of 6th generation Ni-base single crystal superalloy TMS-238 and its tie-lined γ and γ′ phases
Materials Science and Engineering: A.941(2025)148410
Inoue T., Iwai M.
Pinching simulation of the coconut crab considering the 3D shape and internal characteristics of the robust claw exoskeleton
Results in Engineering.27(2025)105723
Chen H., Egusa D., Li Z., Sasaki T., Ozasa R., Ishimoto T., Okugawa M., Koizumi Y., Nakano T., Abe E.
Phase-separation induced dislocation-network cellular structures in Ti-Zr-Nb-Mo-Ta high-entropy alloy processed by laser powder bed fusion
Additive Manufacturing.102(2025)104737
Guo S., Okuma G., Naito K., Kakisawa H.
Volume fraction dependence of electrical conductivity in B4C-based composites with ZrB2-ZrC
Materials Letters.397(2025)138820
Tan X.F., Paul V., Ohmura T., McDonald S.D., Nogita K.
Nanoindentation Study of Phases in Near-Eutectic Sn-Bi Alloy
2025 International Conference on Electronics Packaging and iMAPS All Asia Conference, ICEP-IAAC 2025.(2025)79-80
Tanks J., Tamura K.
Room-Temperature Material Recycling/Upcycling of Polyamide Waste Enabled by Cosolvent-Tunable Dissolution Kinetics
Angewandte Chemie - International Edition.(2025)
Hatakeyama T., Ida S., Sawada K., Yoshimi K.
Microstructure Development during Creep Deformation of 9Cr–1Mo–V–Nb Steel with Excess Nitrogen Introduced by Solution Nitriding – Multidimensional Scatter Diagram Analysis of STEM-EDS Maps by Machine Learning –
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan.111[9](2025)536-549
Kimura Y.
Preface to the 110th Anniversary Special Issue of Tetsu-to-Hagané
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan.111[9](2025)
Kato H., Horii Y., Watanabe C., Sasaki T., Ichiyanagi K., Noguchi M., Fujimori H., Yamamoto T., Suzuki H., Hirai Y., Ohmura T., Yano K., Hayashi S., Kajiwara T.
Molecular Thermal Engine Based on a Highly Flexible Elastic Crystal
Journal of the American Chemical Society.(2025)
Ishimoto T., Morita N., Ozasa R., Matsugaki A., Gokcekaya O., Higashino S., Tane M., Mayama T., Cho K., Yasuda H.Y., Okugawa M., Koizumi Y., Yoshiya M., Egusa D., Sasaki T., Abe E., Kimizuka H., Ikeo N., Nakano T.
Superimpositional design of crystallographic textures and macroscopic shapes via metal additive manufacturing—Game-change in component design
Acta Materialia.286(2025)120709
Bhattacharyya J.J., Faberman S., Li Z., Sullivan A., Cheng D., Khoury B., Gao Y., Sasaki T., Zhou B., Warner D., Agnew S.R.
Guinier-Preston (GP) zone strengthening of dilute magnesium alloys comprised of earth-abundant elements
Scripta Materialia.258(2025)116514
Bhattacharyya J.J., Faberman S., Sullivan A., Saha M., Sasaki T., Agnew S.R.
Strain partitioning-induced anisotropy in thermomechanically processed magnesium alloys comprised of earth-abundant elements
Scripta Materialia.262(2025)116659
Edalati K., Ahmed A.Q., Akrami S., Ameyama K., Aptukov V., Asfandiyarov R.N., Ashida M., Astanin V., Bachmaier A., Beloshenko V., Bobruk E.V., Bryła K., Cabrera J.M., Carvalho A.P., Chinh N.Q., Choi I.-C., Chulist R., Cubero-Sesin J.M., Davdian G., Demirtas M., Divinski S., Durst K., Dvorak J., Edalati P., Emura S., Enikeev N.A., Faraji G., Figueiredo R.B., Floriano R., Fouladvind M., Fruchart D., Fuji M., Fujiwara H., Gajdics M., Gheorghe D., Gondek, González-Hernández J.E., Gornakova A., Grosdidier T., Gubicza J., Gunderov D., He L., Higuera O.F., Hirosawa S., Hohenwarter A., Horita Z., Horky J., Huang Y., Huot J., Ikoma Y., Ishihara T., Ivanisenko Y., Jang J.-I., Jorge A.M., Kawabata-Ota M., Kawasaki M., Khelfa T., Kobayashi J., Kommel L., Korneva A., Kral P., Kudriashova N., Kuramoto S., Langdon T.G., Lee D.-H., Levitas V.I., Li C., Li H.-W., Li Y., Li Z., Lin H.-J., Liss K.-D., Liu Y., Cardona D.M.M., Matsuda K., Mazilkin A., Mine Y., Miyamoto H., Moon S.-C., Müller T., Muñoz J.A., Murashkin M.Y., Naeem M., Novelli M., Olasz D., Pippan R., Popov V.V., Popova E.N., Purcek G., de Rango P., Renk O., Retraint D., Révész Á., Roche V., Rodriguez-Calvillo P., Romero-Resendiz L., Sauvage X., Sawaguchi T., Sena H., Shahmir H., Shi X., Sklenicka V., Skrotzki W., Skryabina N., Staab F., Straumal B., Sun Z., Szczerba M., Takizawa Y., Tang Y., Valiev R.Z., Vozniak A., Voznyak A., Wang B., Wang J.T., Wilde G., Zhang F., Zhang M., Zhang P., Zhou J., Zhu X., Zhu Y.T.
Erratum to ’ Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review’ [J. Alloys Compd. 1002 (2024) 174667](S0925838824012544)(10.1016/j.jallcom.2024.174667)
Journal of Alloys and Compounds.1034(2025)181313
Maeda T., Osada T., Ozaki S.
Reliability evaluation scheme for ceramics based on defect size distribution inversely estimated from standardized tests
Journal of the American Ceramic Society.(2025)
Shimizu K., Yamaguchi M., Akamaru S., Nishimura K., Abe R., Sasaki T.T., Wang Y., Toda H.
Revisiting hydrogen trapping in Mg32(Al, Zn)49 approximant crystal: Influence of chemical disorder
Scripta Materialia.265(2025)116730
Meng L., Kitashima T., Lin P., Wang Z., Jiang Z., Huang Q., Zhao J.
Achieving polymer-like ultrahigh elasticity in Ti−6Al−4V alloy via a new cryo-deformation induced α′-to-α″ martensite phase transformation
Acta Materialia.293(2025)121109
Klimashin F.F., Učík M., Matas M., Holec D., Beutner M., Hackert-Oschätzchen M., Xomalis A., Schwiedrzik J.J., Klusoň J., Jílek M., Lümkemann A., Michler J., Edwards T.E.J.
Superstoichiometric (Al,Cr)N: Nitrogen's whereabouts and role in structure-property relationships
Acta Materialia.294(2025)121158
Guo S., Okuma G., Naito K., Kakisawa H.
Effect of thermal exposure at 1200 ℃ and 1400 ℃ on microstructure and mechanical properties of reactive hot-pressed LaMgAl11O19 ceramics
Ceramics International.(2025)
Kikuchi K., Nakata T., Li Z.H., Sasaki T.T., Miyashita Y., Kamado S.
Strategic approach to simultaneously enhance strength, formability, and corrosion-resistance synergy of age-hardenable Mg-Zn-Ca-Al-Mn alloy sheet with low Mn content via optimizing Zn and Ca contents
Journal of Alloys and Compounds.1027(2025)180504
Okuma G.
Multiscale Synchrotron X-ray CT Analysis of Sintering Defects for Highly Reliable Materials
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy.72[5](2025)121-128
Daram P., Kusano M., Watanabe M.
Investigation of the Process Optimization for L-PBF Hastelloy X Alloy on Microstructure and Mechanical Properties
Materials.18[8](2025)1890
Wang M., Ishii A., Sakaushi K.
Accelerated Electrocatalyst Degradation Testing by Accurate and Robust Forecasting of Multidimensional Kinetic Model with Bayesian Data Assimilation
ACS Energy Letters.10[1](2025)22-29
Kautsar Z.H., Sepehri-Amin H., Tang X., Kulesh N., Sasaki T.T., Ohkubo T., Hono K.
Heavy rare earth-free high resistivity and coercivity Nd-Fe-B hot-deformed magnet developed by Pr-Cu diffusion and CaF2-LiF eutectic addition
Journal of Alloys and Compounds.1010(2025)177738
Koyama M., Sawaguchi T.
Overview of ε-Martensite-Related Damage Evolution and its Solution: Pathways for Local Stress Accommodation, Plastic Damage Retardation, and Microcrack Arrest
ISIJ International.65[4](2025)471-488
Ida S., Nakagawa E., Paul V., Ohmura T., Yoshimi K.
Enhanced deformability of TiC in Mo-Ti-C ternary system by off-stoichiometry
Materialia.40(2025)102412
Ishii A., Koyama T., Abe T., Ode M.
Phase-field simulation coupled with a CALPHAD database for analyzing microstructural evolution during liquid-phase sintering of Nd–Fe–B magnets
Journal of Alloys and Compounds.1025(2025)180266
Mori S., Ii S., Moronaga T., Hara T., Karube K., Taguchi Y., Tokura Y., Yu X.
Direct Observations of Mechanical Strain-Induced Wavevector Switching in a (Fe,Ni,Pd)3P Magnet with Anisotropic Dzyaloshinskii-Moriya Interaction
ACS Applied Materials and Interfaces.17[15](2025)22921-22928
Torigoe S., Nakashima Y., Tsuzuki Y., Takata K., Ikeda K.-I., Ii S.
Evolution of microstructures during isothermal annealing in hot-rolled Al-Mn alloys
Keikinzoku/Journal of Japan Institute of Light Metals.75[3](2025)137-143
Bhandari L., Gaur V., Briffod F., Shiraiwa T., Enoki M.
High-temperature fatigue and creep damage mechanism in additively manufactured Ti-6Al-4V alloy
Engineering Failure Analysis.174(2025)109534
Saito T., Yuyama M., Murakami H.
Effect of cobalt presence on creep properties of Ni-based single crystal superalloys at intermediate temperature
Journal of Alloys and Compounds.1022(2025)179871
Ii S., Ikeda K.-I., Hara T.
Multi-dimensional quantitative analysis of precipitates in the hot-rolled Al-1%Mn alloy
Keikinzoku/Journal of Japan Institute of Light Metals.75[3](2025)144-150
Shimizu K., Toda H., Hirayama K., Fujihara H., Tsuru T., Yamaguchi M., Sasaki T.T., Uesugi M., Takeuchi A.
Hydrogen embrittlement in Al–Zn–Mg alloys: Semispontaneous decohesion of precipitates
International Journal of Hydrogen Energy.109(2025)1421-1436
Abe Y., Tsuru T., Fujita Y., Ohtomo M., Sasaki T.T., Yamashita S., Okubo N., Ukai S.
Effects of Al addition on Vickers hardness increase by thermal aging of Fe–Cr–Al alloys — Evaluation by systematic experiments, machine learning modeling, and first-principles calculations
Journal of Nuclear Materials.606(2025)155606
Park M.-H., Shibata A., Harjo S., Tsuji N.
Grain refinement of dual phase steel maximizes deformation ability of martensite, leading to simultaneous enhancement of strength and ductility
Acta Materialia.292(2025)121061
Filimonov A.M., Alam K.M.S., Kvaratskheliya A.R., Grieb T., Sharma B.K., Bianchini B., dos Santos R.F.M., Gomes L.F., Rosenauer A., Gargarella P., Suwannaharn N., Sasaki T.T., Mädler L., Okulov I.V.
Laser processing of a CuTiZr-based alloy by powder bed fusion: From bulk metallic glass to metallic glass composite
Journal of Alloys and Compounds.1026(2025)180339
Kvaratskheliya A., Filimonov A., Bianchini B., Jundullah Hanafi M.I., Gesing T.M., Sasaki T.T., Gargarella P., Mädler L., Okulov I.
Making parts on Mars: Laser processing of iron contaminated by regolith simulant
Materials Today Advances.25(2025)100566
Somekawa H., Ono Y., Naito K., Singh A.
Enhancement of ductility in low temperature regimes via detwinning in Mg alloys
Scripta Materialia.264(2025)116694
Tozman P., Hrkac G., Patrick C.E., Staunton J.B., Saito T., Sasaki T., Ohkubo T., Sepehri-Amin H.
Effect of Co on twin formation and magnetic properties of Sm(Fe,Ti,V)12 alloys
Scripta Materialia.258(2025)116491
Lan X., Okada K., Ueji R., Shibata A.
Improving hydrogen embrittlement resistance in high-strength martensitic steels via thermomechanical processing
Scripta Materialia.264(2025)116711
Banoth S., Moreau L.E., Palleda T.N., Ishida A., Kakehi K., Murakami H.
The effect of yttrium addition on the oxidation behaviour of Al-free Hastelloy-X built by the laser powder bed fusion process
Materials Today Communications.45(2025)112286
Saito T., Harada H., Abe T., Murakami H.
CALPHAD approach for prediction of local phase transformation at superlattice stacking fault in gamma prime precipitates in superalloys with multi-component system
Next Materials.7(2025)100363
Khadka D.B., Shirai Y., Sahara R., Yanagida M., Miyano K.
Ameliorating Defects in Wide Bandgap Tin Perovskite Solar Cells Using Fluorinated Solvent and Hydrazide
Small.21[17](2025)2410048
- 10.1002/smll.202410048
- 10.1002/smll.202570132 ←論文のGraphical abstractが、雑誌の扉絵(Frontispiece)に採用されました。
Wang J., Lin H., Tanks J.D., Arao Y.
Large-area high thermal conductivity graphite-carboxymethylcellulose film easily produced by mechanical exfoliation of natural graphite using a three-roll mill
Composites Part C: Open Access.17(2025)100580
Liang S.J., Yoshino T., Matusmoto R., Sahara R., Toda Y., Matsunaga S., Miyamoto G., Yamabe-Mitarai Y.
Deformation mechanisms of hexagonal close-packed-multi-principal element alloys (HCP-MPEAs) with equiaxed structures
Materials Science and Engineering: A.929(2025)148143
Nandal V., Dieb S., Bulgarevich D.S., Osada T., Koyama T., Minamoto S., Demura M.
Analysis of artificial intelligence-discovered patterns and expert-designed aging patterns for 0.2 % proof stress in Ni-Al alloys with γ – γ' two-phase structure
Next Materials.8(2025)100564
Kawabata T., Kitano H., Ozawa T., Mikami Y.
Reverse bend experiments on the base plate and discussion of the appropriate amount of reverse bending for precrack straightness (Effect of the reverse bend process on the CTOD toughness evaluation and understanding of its mechanisms)Theoretical and Applied Fracture Mechanics.137(2025)104869
Shimizu K., Nakayama S., Shoji H., Kawakubo T., Nagira T., Ohata M., Fujii H.
Significance of fracture toughness for linear friction welded joint of weathering steel
Welding in the World.69[3](2025)739-750
Tamura K., Tanks J., Niizeki D., Watanabe Y., Kogure T., Sakuma H., Kamon M.
Heavy metal ion adsorption mechanism of polysulfide-modified layered double hydroxide
Applied Clay Science.269(2025)107759
Furuya Y.
Effects of S-content on Gigacycle Fatigue Properties of SCM440 Steel
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan.111[4](2025)218-226
Lyu Z., Liu Y., Sciazko A., Komatsu Y., Tao J., Nakamura A., Hara T., Sun K., Shikazono N., Han M.
Co-Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells
Advanced Energy Materials.15[10](2025)2403869
Somekawa H., Hara Y., Moronaga T., Singh A., Ohmura T.
In-situ TEM observation of -axis extension twin formation at grain boundaries
Scripta Materialia.260(2025)116575
Sawada K., Taniuchi Y., Nojima T., Sekido K., Hatakeyama T., Kimura K.
Effect of Cyclic Stress Change on Creep Behavior in ASME P91 Steel
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan.111[2](2025)51-57
Niitsu K., Ichihara F., Miyoshi S., Ode M., Mitsuishi K., Masuda T., Takada K.
Structural analysis of the LiCoO2 cathodes/garnet-type Li6.5La3Zr1.5Ta0.5O12 solid electrolyte interface
Solid State Ionics.421(2025)116804
Jansen H.C., Sharma A., Wieczerzak K., Nayak G.K., Schneider J.M., Schwiedrzik J., Edwards T.E.J., Michler J.
On the efficacy of Xe+-pFIB preparation to avoid Ga+-FIB induced phase transformations in Al-Ni alloys
Scripta Materialia.260(2025)116589
Tasaki W., Tsuchiya K., Nagashima N., Singh A., Sawaguchi T.
Effect of phase stability of FCC and HCP phases on tensile and low-cycle fatigue properties of Co–20Cr–10Mo–xNi medium-entropy alloys
Journal of Alloys and Compounds.1016(2025)178851
Katagiri J., Nomoto S., Kusano M., Watanabe M.
Influence of high Reynolds number flow inside molten pool on keyhole instability-induced pore formation process in laser powder bed fusion
Materials Today Communications.44(2025)111756
Singh A., Basha D.A., Hiroto T., Matsushita Y., Seenuvasaperumal P., Somekawa H., Tsuchiya K.
Deformation behavior of Mg-Zn-Y icosahedral quasicrystal phase in a magnesium matrix by high pressure torsion at room temperature
Journal of Materials Science.60[3](2025)3140021228-1252
Wada K., Komatsu M., Ono Y., Yamabe J., Enoki H., Iijima T.
Hydrogen-induced degradation of SUS304 austenitic stainless steel at cryogenic temperatures
Materials Science and Engineering: A.927(2025)147988
Matsuda M., Ohsumi S., Ii S.
Morphological and Crystallographic Features of α' Martensite in Binary Ti–Hf Alloy
Shape Memory and Superelasticity.(2025)
Ito T., Ogawa Y., Gong W., Mao W., Kawasaki T., Okada K., Shibata A., Harjo S.
Role of solute hydrogen on mechanical property enhancement in Fe–24Cr–19Ni austenitic steel: An in situ neutron diffraction study
Acta Materialia.287(2025)120767
Shimoda K., Kakisawa H.
Preparation of enhanced erosive wear resistance SiC-fiber-reinforced SiC ceramic matrix composites integrated with a knit fabric via high-temperature crystallization of amorphous Si–C–O–Al fibers
Ceramics International.51[5](2025)6206-6219
Yoshinaka F., Sawaguchi T., Takamori S., Emura S., Singh D.
Retarded fatigue crack growth in Fe–15Mn–10Cr–8Ni–4Si via reversible γ ↔ ε transformation
International Journal of Fatigue.193(2025)108829
Kitano H., Saitou N., Takahashi T.
Study on AI Collaborative System for Efficient Skill Improvement of Welding Skills Trainee*
Yosetsu Gakkai Shi/Journal of the Japan Welding Society.94[1](2025)58-61
Ogawa Y., Takakuwa O., Shibata A.
Overview of gaseous hydrogen-assisted fatigue crack growth in ferritic iron and steels: Bridging micro and macro
International Journal of Hydrogen Energy.102(2025)1507-1529
Guo S., Okuma G., Naito K., Kakisawa H.
Microstructure and mechanical properties of reactive hot-pressed LaMgAl11O19 ceramics
Ceramics International.51[3](2025)4058-4066
Nakamura G., Iwasaka A., Furuya Y., Takahashi K.
Effects of Laser Peening on Rotating Bending Fatigue Strength of Additive Manufactured Maraging Steel in Very High Cycle Fatigue Regime
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan.111[1](2025)9-19
Nomoto S., Kusano M., Kitashima T., Watanabe M.
Numerical simulation method for the laser powder bed fusion process by lattice Boltzmann and multi-phase field methods
Computational Materials Science.250(2025)113688
Kuramoto S., Kawano Y., Mori Y., Kobayashi J., Emura S., Sawaguchi T.
Mechanical Properties and Deformation Behavior in Severely Cold-Rolled Fe-Ni-Al-C Alloys with Lüders Deformation -Overview with Recent Experimental Results -
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals.89[1](2025)22-31
Yurishima R., Ikeda A., Ikeda T.
Determination of the Entire Existence Composition Range of CrMnFeCoNi High-Entropy Alloys Using Sintered Diffusion Multiple Method
Materials.18[2](2025)295
Redarce T., Iwata K., Ogawa Y., Tsuzaki K., Shibata A., Matsunaga H.
Ausformed high-strength low-alloy steel exhibits exceptional resistance to fatigue crack-growth in high-pressure hydrogen environments
International Journal of Fatigue.193(2025)108814
Chen T.-W., Wu B.-C., Kang Y.-C., Murakami H., Toda Y., Chung T.-F., Kumar Misra R.D., Yeh A.-C.
The impact of grain boundary serration treatments on the creep deformation of Udimet-720Li superalloy
Materials Science and Engineering: A.924(2025)147729
Kimura H., Nishikawa M., Kutsuzawa N., Tokito F., Kobayashi T., Kurniawan D.A., Shioda H., Cao W., Shinha K., Nakamura H., Doi K., Sakai Y.
Advancements in Microphysiological systems: Exploring organoids and organ-on-a-chip technologies in drug development -focus on pharmacokinetics related organs-
Drug Metabolism and Pharmacokinetics.60(2025)101046
Asano M., Hirayama T., Somekawa H., Matsuoka T.
Sudden drop in friction coefficient of extruded Mg matrix composites
Ceramics International.(2025)
Kimura Y., Moronaga T., Tsuzaki K.
Enhanced Resistance to Delayed Fracture in 0.09 mass% P-Doped High-Strength Steel Processed by Warm Tempforming
ISIJ International.65[1](2025)20-25
Meng L., Kitashima T., Lin P., Zheng L., Jiang Z., Zhao J.
In situ EBSD investigation of microtexture evolution and slip activation of α macrozones during tensile deformation in Ti-6Al-4V alloy
Materials Science and Engineering: A.924(2025)147739
Honda H., Watanabe M.
Measurement of Laser Absorptivity of Inconel Powders with Additive Manufacturing Machine
Materials Transactions.66[1](2025)107-112
Ogawa Y., Shibata A.
Plastic flow in Fe-Cr-Ni austenitic steel under the presence of solute H: A study via room temperature creep
Acta Materialia.285(2025)120659
Zaiser E., Fantin A., Manzoni A.M., Hesse R., Többens D.M., Hsu W.-C., Murakami H., Yeh A.-C., Pavel M.J., Weaver M.L., Zhu H., Wu Y., Vogel F.
Elucidating hierarchical microstructures in high entropy superalloys: An integrated multiscale study
Materials Characterization.220(2025)114642
Takakuwa O., Ogawa Y.
Modeling hydrogen-assisted fatigue crack growth in low-carbon steel focusing on thermally activated hydrogen-dislocation interaction
Science and Technology of Advanced Materials.26[1](2025)2436345
Briffod F., Yasuda K., Zhu J., Shiraiwa T., Jhon M., Gunawan F., Sahay R., Raghavan N., Budiman A.S., Enoki M.
Fatigue and fracture of accumulative roll-bonded Cu/Nb materials: Effects of layer thickness and loading direction
International Journal of Fatigue.193(2025)108772
Hibi Y., Matsumoto T., Midorikawa M., Uesaka S., Mizoshiri M., Tanimura T., Okada M., Naito K., Naito M.
Defining the degree of degradation in plastics: Quantification of accumulated degradation products and leached stabilizers for predicting end-of-life
Polymer Degradation and Stability.232(2025)111128
Lee J.-L., Tsai C.-C., Chou P.-H., Yeh A.-C., Murakami H.
Development of oxidation-resistant L12-strengthened medium to high entropy alloys for additive manufacturing
Journal of Alloys and Compounds.1010(2025)177596
Yoshimura S., Wada K., Park S., Matsunaga H.
Factors determining the torsional fatigue strength in bainitic steels with banded microstructures
International Journal of Fatigue.192(2025)108714
Yoshida S., Fu R., Gong W., Ikeuchi T., Bai Y., Feng Z., Wu G., Shibata A., Hansen N., Huang X., Tsuji N.
Characteristic deformation microstructure evolution and deformation mechanisms in face-centered cubic high/medium entropy alloys
Acta Materialia.283(2025)120498
Tai C.-L., You J.-D., Chen J.-J., Liang S.-C., Chung T.-F., Yang Y.-L., Ii S., Ohmura T., Zheng X., Chen C.-Y., Yang J.-R.
In-situ transmission electron microscopy investigation of the deformation mechanism in CoCrNi and CoCrNiSi0.3 nanopillars
Scripta Materialia.255(2025)116405
Rahman M., Maeda T., Osada T., Ozaki S.
Finite element analysis of crack propagation, crack-gap-filling, and recovery behavior of mechanical properties in oxidation-induced self-healing ceramics
International Journal of Solids and Structures.306(2025)113104
Gorsse S., Lin W.-C., Murakami H., Rignanese G.-M., Yeh A.-C.
Advancing refractory high entropy alloy development with AI-predictive models for high temperature oxidation resistance
Scripta Materialia.255(2025)116394
Shimoda K., Colin C.
In situ monitoring of the mechanical and electrical property changes of amorphous Si–Al–C–O fibers during heating to 1900 ℃ and correlation of these changes with the accompanying structural and crystallinity changesJournal of the European Ceramic Society.45[2](2025)116889
Singh D., Yoshinaka F., Takamori S., Emura S., Sawaguchi T.
Revealing extraordinary plasticity in single crystal Fe-15Mn-10Cr-8Ni-4Si alloy
Scripta Materialia.255(2025)116382